| Technical parameters | Index | ||
| Input | Nominal value | Voltage input | Current input |
| DC 0-100V、DC 0-1500V See the physical wiring diagram | Shunt: 0-75mV Hall sensor: 0-5V, 0-200mA | ||
| Overload | 1.2 times can sustain normal operation, 2 times can sustain 1 second | ||
| Power consumption | Voltage: ≤0.2VA, current ≤0.1VA | ||
| Accuracy class | Class 0.5 | ||
| Function | Display | 8-bit segment LCD screen (LCD) | |
| Communication Interface | RS485 (two options) | ||
| Communication protocol | Modbus-RTU, DL/T 645-2007, DLT698 | ||
| Switch | Switch output (DO) | 2 relay outputs, 2A/30VDC or 2A/250VAC | |
| Switch input (DI) | 2 dry contact inputs | ||
| Analog | Analog output (AO) | 4-20mA output (0.5 level) | |
| Pulse output | Two channels power pulse output (the second power pulse can be switched to second pulse) | ||
| See the display in SYS->PULS in the meter menu setting, for example: display 100, which means 100imp/ kWH | |||
| Working power supply | Voltage | AC/DC 85-265V or DC 12V-48V | |
| Power consumption | ≤10W | ||
| Power frequency
withstand voltage |
Power supply//signal input//RS485 communication 4kV/1min;
Except for power supply, signal input and RS485 communication, other unconnected circuits are 2kV/1min
|
||
|
Insulation resistance
|
≥100MΩ
|
||
|
Average barrier-free
working time
|
≥50000h
|
||
|
Environment |
Temperature
|
Working temperature: -25℃～+65℃
Storage temperature: -40℃～+80℃
|
|
|
Humidity |
≤95%RH, no condensation, no corrosive gas |
||
|
Altitude
|
≤3000m |
||
DJSF1352-RN-6/S DC Din Rail Energy Meter
● Voltage input range: DC 0-100V, DC 0-1500V
● Current input: Shunt: 0-75mV, Hall sensor: 0-5V, 0-200mA
● Accuracy level: 0.5 class
● Display: 8-bit segment LCD screen (LCD)
● Communication interface: RS485 (two options)
● Communication protocol: Modbus RTU, DL/T 645-2007, DLT698
● Working power supply: AC/DC 85–265 V or DC 12–48 V
● 6P size
- Fast And Safe Logistics
- Sample Available
