AHKC-EKA Split Core Hall Effect Current Sensor

Installation

Precautions

1. When the Hall sensor is used, attention must be paid to the coupling between the primary side coil and assistant side coil in order to get better dynamic characteristics and sensitivity, single conductor that should cram the thread hole of Hall sensor module completely is proposed to use. 
2. When the Hall sensor is used, the best measuring accuracy can be got under rated input current value. When the measured current is much less than the rated value, the primary side can use multi-turns if want to obtain the best accuracy, that is IpNp=rated ampere-turns. In addition, the temperature of the primary side feeder line cannot be more than 80℃. 
3. When the Hall current sensor is working normally, the auxiliary power supply cannot be more than ±20% of calibration value. 
4. The Hall Current sensor is strictly prohibited to be fallen from high place (≥1m) during installation and use. 
5. Zero and full scale regulator potentiometer can not be adjusted. 
6. Auxiliary power supply is required to be deployed voluntarily. 
7. Power positive and negative poles cannot be inversely connected.

Package

MINIMUM PACKAGE
MINIMUM PACKAGE	Package dimensions(1 PC) 16*12.5*7.5cm		Package Weight(1 PC) 0.078Kg
WHOLE BOX PACKAGE	Package dimensions(170 PCS) 45.5*45.5*20cm		Package Weight(170 PCS) 14.26kG
PRODUCT HS CODE	9030339000